Skip to product information
Pearson Carbon Road Handlebar, 360mm

Handlebar · Pearson

Pearson Carbon Road Handlebar

£170

Will it fit my Pearson?

Fits every Pearson. Forge, Shift 2.0, On&On Adventure and On&On Race.

Standard on Forge 105, Ultegra and Force.

Not sure what your bike has? Send your frame number to [email protected] and the workshop will check.

Width
ColorBlack
Reach

75mm

Drop

130mm

Outward bend

3.9 degrees (at drop)

Material

Carbon

The details

The bar on every Forge 105, Ultegra and Force.

Our two-piece carbon road bar, fitted as standard to the Forge 105, Ultegra and Force builds with the Pearson carbon stem. It fits every Pearson.

75mm reach, 130mm drop and 3.9 degrees of flare at the drops, in widths from 360 to 440mm.

On the bike

How it looks fitted

On a Forge Ultegra in Heritage Blue
On a Forge Ultegra in Heritage Blue
On a Forge Ultegra in Atomic Aubergine
On a Forge Ultegra in Atomic Aubergine
More Information
Geometry
Full Specification

Width

380mm, 400mm or 420mm

Reach

75mm

Drop

130mm

Outward bend

3.9 degrees (at drop)

Material

Carbon

Customer Reviews

FAQs

Buyers guide

Will this fit my Pearson?

Each part lists the Pearson models and model years it suits in the description and key features. If you are unsure, send us your frame and model year and we will confirm the right part before you order.

Will it fit frames from other brands?

Many of our cockpit and finishing parts use standard fittings, such as a 1 1/8 inch steerer, so they work on a wide range of frames. Check the key features for the exact standard, and ask us if you need to be certain.

What torque should I use when fitting it?

Where a torque figure applies it is listed in the key features. Carbon parts in particular should be fitted to the stated torque with a calibrated torque wrench to avoid damage. If in doubt, have a bike shop or one of our retail partners fit it.

Can someone fit it for me?

Yes. Any good bike shop or one of our retail partners can fit it, and we’re happy to talk them through it. If you’re ordering a new bike, ask us and we can fit the part as part of your build.

How do I look after carbon components?

Always fit carbon parts to the recommended torque, use carbon assembly paste where appropriate and avoid clamping outside the marked areas. Inspect them regularly and replace anything that has taken a hard knock.

Are the fitting bolts included?

Replacement parts come with the bolts and small fittings needed for a straightforward swap unless the description says otherwise. If anything is missing, contact us and we will put it right.

Not sure what fits?

Send us your frame number and the build shop will tell you which part your bike needs.

Email the build shop

FAQs

Need further information? 

We are here to help you

Learn more

Customer support

Need further information?
We are here to help you

Talk to an expert