Skip to product information
On&On Race - Carbon Gravel Race Frameset
On&On Race - Carbon Gravel Race Frameset

Gravel / Gravel / Frameset

On&On Race - Carbon Gravel Race Frameset

£3,000

or £83.33 a month at 0% APR over 36 months. How it works

Size View geometry
ColourDawn Blue
Tailor your fit Free with every build. We set each part to the standard fit for your size; change anything and our workshop builds your bike to that exact spec to tailor the bike to your fit. Built to your fit. Open to adjust.

Your frameset ships with our aero carbon seatpost. Choose the setback that suits your fit; there is no extra cost either way.

Standard: 0mm
Upgrades Optional extras to complete your build: finishing components, pedals, bottles and curated upgrade packs where available. On complete bikes we fit them before your bike ships.
Carbon Stem

Carbon Stem

£130
Carbon Flared Gravel Handlebar

Carbon Flared Gravel Handlebar

£170
Hope T47 Bottom Bracket

Hope T47 Bottom Bracket

£115

CeramicSpeed T47 Bottom Bracket

£275

The On&On Race frameset is Pearson's pure performance gravel and all-road chassis, built for riders who demand speed, responsiveness and racing-level performance, whether you're pushing hard on fast gravel sectors or chasing tarmac PBs.

Crafted as a lightweight, high-stiffness platform with modern gravel racing geometry, the On&On Race gives you the precision, power transfer and agility you need to ride fast, race hard or build a do-it-all road-gravel bike. It's the ideal foundation for a bike that feels sharp, efficient and race-ready.

Material

Carbon, T1000 & M40JB

Tyre clearance

Up to 45mm

Fork

On&On Race, carbon

Headset

1 1/2" integrated headset, CeramicSpeed SLT bearings

Bottom Bracket

Not included, requires T47e

Included with every build

Crash replacement

Discount to keep you riding

Lifetime warranty

On the frame and fork

Precision fit

£200 bike fit cashback

More Information

On&On Race is tuned for speed off the road. The carbon layup is optimised to strip out anything that does not earn its place, for a clean, fast ride across any surface.

Who it's for: Gravel racers and riders who want to go hard off road.

Where it goes: Start lines and fast gravel, with the direct response to turn every watt into forward drive.

Built around your fit: Every frameset is built to order. Choose your seatpost offset when you order, and our fit team will help you choose your size and the bar, stem and cranks to suit you.

GeometrySizes 1 to 5
SIZE/CM1/492/523/544/565/58
A Frame reach365373381390399
B Frame stack542558579598617
C Effective top tube521539553568583
D Seat tube length470495520545570
E Head tube length110125145165185
F Seat angle74.073.573.573.573.5
G Head angle70.571.071.571.571.5
H BB drop78.078.078.078.078.0
I Wheelbase10111020103010461061
J Chainstay length435435435435435
K Fork offset5050505050
L Trail (40C Tyre)6969666666
Rider height (ft/in)5'2-5'75'6-5'105'9-6'05'11-6'36'2+
Rider height (cm)158-171167-178175-183180-190188+
Inside leg (in)29-3130-3332-3534-3736+
Inside leg (cm)73-7977-8381-8786-9291+
Frame geometry diagram
Full Specification

Frameset

Frame

On&On Race, carbon high-strength T1000 & high-rigidity M40JB

Fork

On&On, carbon

Headset

1 1/2" integrated headset, CeramicSpeed SLT bearings

Bearings
CeramicSpeed SLT, 31 g each
Size
1-1/2 in
Dimensions
40 x 52 x 7 mm (ID x OD x width)

Bottom Bracket

Not included, requires T47e

Also on this build

Saddle Clamp

For 7x7mm rails

Seat Clamp

Integrated saddle clamp wedge with rubber cover

Rear Derailleur Hanger

Direct mount alloy hanger

Front Derailleur Hanger

Braze on alloy hanger

Front Wheel Axle

M12 x 1, 122mm length

Rear Wheel Axle

M12 x 1, 166mm length

Bolts

M5 bolts on all cage and rack mounts, and plugs for cable routing

Extras (Included)

Seat clamp rubber cover

Extras For Purchase

Available To Purchase

  • Expander Bolt, Headset Topcap, Spacers, Stem, Handlebar, Bottom Bracket
Customer Reviews★ 5.0 · 2 ratings
On&On Race · Press

What the press say

For such a stiff bike the On & On Race doesn't feel harsh at all; Pearson has done a good job of speccing a frame that has a small amount of flex, a bit of compliance where it's needed to take the edge off.
Stu Kerton · Dec 2025Read the review on road.cc (opens in a new tab)
Verdict
9/10
road.cc Recommends
road.cc Recommends

FAQs

Buyers guide

Who is the On&On Race for?

The On&On Race is for riders chasing pure speed off road. It is a stripped-back, performance-first gravel race bike, tuned for fast, committed riding across mixed terrain.

What carbon is the On&On Race frame made from?

The On&On Race frame is built from T1000 and M40JB Toray carbon. This is a high-performance carbon specification that delivers outstanding stiffness-to-weight performance, comparable to top-tier road race framesets. It gives the On&On Race its sharp responsiveness on hard accelerations and technical gravel sections, without sacrificing durability on rough terrain.

How much does the On&On Race frameset weigh?

The On&On Race frame weighs 1000g. The fork weighs 440g. Combined frameset weight is approximately 1440g, measured at size 3.

What does a complete On&On Race bike weigh?

Weight depends on the build. Measured at size 3: SRAM RED XPLR AXS 7.88kg, SRAM Force XPLR AXS 8.07kg and Shimano GRX 827 Di2 8.46kg. ERE Tenaci GA40 carbon wheels come on every build.

What is the maximum tyre clearance on the On&On Race?

The On&On Race has a maximum tyre clearance of 45mm. This accommodates a wide range of gravel and all-road tyre options while maintaining the frame's aero-optimised profile.

Is the On&On Race tubeless-ready?

Yes. ERE Tenaci GA40 Carbon wheels are tubeless-compatible. Standard builds ship with inner tubes. Tubeless conversion requires a valve kit, sealant, and tubeless-rated tyres. A tubeless setup reduces the risk of pinch flats on gravel and allows you to run lower pressures for improved grip.

What bottom bracket standard does the On&On Race use?

The On&On Race uses T47 on every build. All three builds come with a CeramicSpeed T47 bottom bracket, so there is no entry-level option on this model.

What groupset options are available on the On&On Race?

Three builds: SRAM RED XPLR AXS (1x, 13-speed, wireless), SRAM Force XPLR AXS (1x, 13-speed, wireless) and Shimano GRX 827 Di2 (1x, 12-speed, wireless shifters). The On&On Race is 1x only. A single chainring keeps the drivetrain simple, light and reliable for racing.

What wheels come on the On&On Race?

ERE Tenaci GA40 Carbon wheels are fitted as standard across all On&On Race builds, regardless of groupset tier. Unlike the On&On Adventure, there is no alloy wheel option on the Race. This ensures consistent rolling performance and weight across the range.

What dropout standard does the On&On Race use?

The On&On Race uses UDH (Universal Derailleur Hanger). UDH hangers are widely stocked by bike shops globally, making field servicing and hanger replacement straightforward. If you damage a hanger during a race or on a remote route, finding a replacement is rarely difficult.

What mounts and carrying options does the On&On Race have?

The On&On Race is a performance-focused platform, so mounting provisions are deliberately minimal. Bottle mounts accommodate either a single aero bottle or two standard-size bottles. The flattened top tube is shaped for easy shouldering in dismount and run sections. There are no dedicated luggage mounts, fork cargo fittings, or bikepacking-specific attachments. For a gravel bike with full carrying capacity, the On&On Adventure is the right model.

Is the On&On Race UCI approved?

Yes. The On&On Race is UCI approved and certified to ISO 4210. It is legal for use in UCI-sanctioned gravel and cyclocross events.

If I'm building an On&On Race frameset, what bottom bracket do I need?

The On&On Race uses T47, 68mm shell. For SRAM cranks, use a T47 bottom bracket made for the DUB spindle. For Shimano GRX cranks with a 24mm spindle, use a T47 68mm bottom bracket for that spindle. CeramicSpeed T47 is what we fit to every complete build and is the benchmark choice for a frameset build.

For specific BB recommendations based on your crank choice, contact us on 020 3828 7696 or email [email protected].

Can I fit a dropper post to the On&On Race?

The On&On Race is a dedicated race platform rather than a trail or bikepacking build, so it was not designed with internal dropper post routing as a standard feature. If you are considering a dropper post integration, contact us before purchasing to confirm compatibility with your specific dropper model and seatpost diameter.

Fit Finder

Answer a few questions and we will match you to your frame size.

Find your size

FAQs

Need further information? 

We are here to help you

Learn more

Customer support

Need further information?
We are here to help you

Talk to an expert
Find your fit
A guide to get you close. We always recommend a professional bike fit, and we confirm your position before we build.