Skip to product information
Pearson One-Piece Carbon Road Handlebar, 380mm x 90mm

Handlebar · Pearson

Pearson One-Piece Carbon Road Handlebar

£450

Will it fit my Pearson?

Fits every Pearson. Forge, Shift 2.0, On&On Adventure and On&On Race.

Standard on Shift 2.0, Forge Dura-Ace and Forge RED.

An upgrade on Forge 105, Ultegra and Force. It replaces the separate bar and stem; add the one-piece top cap and spacers.

Not sure what your bike has? Send your frame number to [email protected] and the workshop will check.

Width
Stem Length
Reach

80mm

Drop

125mm

Outward bend

1.8 degrees (at drop)

Material

Carbon

The details

One piece of carbon from the steerer to the drops.

Bar and stem moulded as one piece of carbon, as fitted to every Shift 2.0 and to the Forge Dura-Ace and RED builds. It fits every Pearson, so it is also the upgrade for a Forge 105, Ultegra or Force, or an On&On.

Choose the width and stem length that match your fit. 80mm reach, 125mm drop and 1.8 degrees of flare at the drops.

On the bike

How it looks fitted

On a Shift 2.0 Dura-Ace in Racing White
On a Shift 2.0 Dura-Ace in Racing White
On a Forge Dura-Ace in Atomic Aubergine
On a Forge Dura-Ace in Atomic Aubergine
More Information
Geometry
Full Specification

Width

380mm, 400mm or 420mm

Stem

Integrated stem: 90mm, 100mm, 110mm or 120mm length with a 6 degree drop. The angle is fixed; a one-piece cockpit cannot be flipped.

Reach

80mm

Drop

125mm

Outward bend

1.8 degrees (at drop)

Material

Carbon

Customer Reviews

FAQs

Buyers guide

Will this fit my Pearson?

Each part lists the Pearson models and model years it suits in the description and key features. If you are unsure, send us your frame and model year and we will confirm the right part before you order.

Will it fit frames from other brands?

Many of our cockpit and finishing parts use standard fittings, such as a 1 1/8 inch steerer, so they work on a wide range of frames. Check the key features for the exact standard, and ask us if you need to be certain.

What torque should I use when fitting it?

Where a torque figure applies it is listed in the key features. Carbon parts in particular should be fitted to the stated torque with a calibrated torque wrench to avoid damage. If in doubt, have a bike shop or one of our retail partners fit it.

Can someone fit it for me?

Yes. Any good bike shop or one of our retail partners can fit it, and we’re happy to talk them through it. If you’re ordering a new bike, ask us and we can fit the part as part of your build.

How do I look after carbon components?

Always fit carbon parts to the recommended torque, use carbon assembly paste where appropriate and avoid clamping outside the marked areas. Inspect them regularly and replace anything that has taken a hard knock.

Are the fitting bolts included?

Replacement parts come with the bolts and small fittings needed for a straightforward swap unless the description says otherwise. If anything is missing, contact us and we will put it right.

Not sure what fits?

Send us your frame number and the build shop will tell you which part your bike needs.

Email the build shop

FAQs

Need further information? 

We are here to help you

Learn more

Customer support

Need further information?
We are here to help you

Talk to an expert